איכות ציפוי הצבע והלכה תלויה בהכנת משטח העץ. Before the final treatment, the humidity should be checked, the surface should be properly cleaned, unevenness should be filled and dust should be removed.
לחות עץ לפני הגמר
Wood to be painted must be dried to a humidity of 10–12%, while wood to be varnished and polished should be dried to 8%.
On the wood surface with high humidity, from 20 to 30%, paint and varnish coatings are poorly accepted and wear out quickly. The reason is that when drying, the dimensions of wood decrease in the radial and tangential directions, while they increase when wetting.
אם מימדי העץ משתנים בגבולות גדולים יותר, האלסטיות של הצבע והלכה הופכת לבלתי מספקת. When the wood dries, the coating wrinkles and peels off, and when it gets wet, it separates from the wood or tears in several places.
שיעורי הקצעה, שחיקה וניקיון
המשטח מוכן לפי סוג הגימור:
במסכים צרים יותר, גרור את הטבלה אופקית כדי לראות את כל העמודות.
| עיבוד סופי | תכנון | טחינה | שיעור ניקיון |
|---|---|---|---|
| ציפויים אטומים | אורך גל 4–2,5 mm | נייר שיוף 120 | VI או VII |
| ציור | אורך גל עד 2 mm | נייר שיוף 120–140 | VIII או IX |
| ליטוש עם פוליש שלאק | אורך גל עד 1 mm, ואז ברזל — מכונת רכיבה על אופניים | נייר זכוכית 140–170 | X |
Wood that is coated with painting materials that form an opaque scrum is first processed on planers, and then sanded to the specified cleanliness class.
מילוי בליטות
לפני הצביעה, יש ליישר ולמלא כל אי אחידות על פני השטח, כולל קשרים, שריטות וחתכים.
Openings from dropped nodes should be plugged so that the direction of the fibers of the plug coincides with the direction of the fibers of the element.
הרטבה ושיוף סופי
לפני ליטוש ולכה, יש להרטיב מעט את פני העץ במים. After 2–3 hours of drying, the surface is smoothed with sandpaper 170–200 placed over a soft wood pad with dimensions 100 × 100 mm.
השיוף מתבצע לאורך גרגר העץ בתנועות אחידות. לאחר השיוף יש לשפשף את המוצר או האלמנט בחתיכת מטלית רכה ולנקות אבק בעזרת מברשת.
תחול ומילוי
לפני מריחת צבעים ולכות היוצרים ציפויים אטומים, העץ עובר יסוד בשמן או פריימר אחר. במידת הצורך, מבוצעת שפכטל מקומי או שפכטל של כל המשטח.
Grund צריך:
- סגור נקבוביות;
- קושר את הציפוי עם עץ;
- שפר את הדבקת הציפוי.
צבע הפריימר והמילוי צריכים להתאים לצבע איתו יצבע המוצר.
When varnishing and polishing, priming is done with special transparent primers or diluted varnishes and polishes that will be used for finishing. לדוגמה, לטיפול באיכות גבוהה עם פוליש שלאק, משטח העץ מודר עם 10% פוליש שלאק.